Industrial Solar Panel 600V - 1000V PV Wire Electron Beam Cross Linked Polyolefin Insulation
Photovoltaic copper conductors are suitable for outdoor rooftop applications without conduit and for use in conduits and raceways installed underground in wet locations, and where condensation and moisture accumulations within the conduit do not exceed 90°C. Applications requiring direct burial is permitted with PV wire. All cables comply with TUV’s VW-1 (Vertical Wire) Flame Test. Insulation compounds are rated for flame and sunlight-resistance.
Application
Especially for the connection between Solar power generation device connector and connection of inverter, Under the condition of different climate outdoor installation, and can adapt to the dry and wet indoor working environment
Construction
1. Conductor: fine wire strands of tinned copper wires, according IEC60228, class 5
2. Insulation: halogen free PE, electron beam cross-linked
Colors: black
3. Outer jacket: halogen free and flame retardant PE, electron beam cross-linked resistance against water, UV resistant
Jacket color: black, red
4. Max, temperature at conductors: -40℃ up to +120℃
5.Temperature ranges: -40℃ up to +90℃ (min.25 years)
6. Nominal voltage U0/U: AC 1000V, DC 1500V
7. Mat. DC voltage: 1800V (conductor-conductor, non-earthed system, circuit not under load)
8. AC-test-voltage: 6.5KV
9. Minimum surface resistance of sheath: 109Ώ
10. Other tests: according EN 50618
Advantage:
With high resistance against heat, cold, ozone, UV, oil, microorganism, abrasion, acid & alkaline; Flame free, flexible, easy to strip, extremely mechanical robust, long lifespan etc
We are a manufacture in this filed for many years, we can offer our customers cables with good quality and price.
We Sincerely welcome customers at home and abroad to negotiate and cooperate with us !!!
Our products are sold all over the world, you can rest assured.
